|Elliott Sound Products||Project 06 - High Quality Phono Preamp|
The preamp is slightly changed from the project schematic. It is very easy to build, and gives performance that is second to none. Using 2 opamps, this preamp will outperform most of the circuits you find anywhere on the Internet or the high fidelity stores, with very low noise and accurate RIAA equalisation (but with an extended bottom end that sounds much better than the "true" RIAA equalisation curve).
The preamp requires a +/-15V supply. The board does not include an integral power supply to prevent the possibility of noise or hum. Use the P05 power supply board, or build your own.
|Size (mm)||76 x 40|